Liqui Moly Cavity Protection, Transparent 10L - 6118

Low viscosity corrosion inhibitor for cavity sealing. Water-repellent, with excellent penetration properties and “self-healing effect”. Very finely atomized during spraying, has outstanding creep properties and penetrates well into narrow gaps which need protection (such as sheet metal folds). A slightly sticky wax coating remains after drying.

AREAS OF APPLICATION

• As corrosion protection coating of cavities on doors, hoods, crossmembers, reinforcements, etc
• in passenger cars, commercial vehicles or as a universal corrosion protection product for machines, machine components and other tools

APPLICATION

• Clean the surfaces to be treated thoroughly in advance and remove rust. The surfaces must be dry and free of wax, dirt and grease and largely free of dust
• Shake well before use! Can be applied using the Cavity Compressed-Air Can Gun (part no. 6226) at an operating pressure of 2 – 4 bar. Optimum creep effect at an application temperature of 15 – 25 °C
• Do not leave containers standing open as a skin will form on the surface of the material.

PEAK PERFORMANCE. MAXIMUM PROTECTION

• Wax basis

ADDITIONAL INFORMATION

• Low viscosity corrosion inhibitor for cavity sealing
• Water-repellent, with excellent penetration properties and “self-healing effect”
• Very finely atomized during spraying, has outstanding creep properties and penetrates well into narrow gaps which need protection (such as sheet metal folds)
• Optimum creep effect at an application temperature of 15 – 25 °C
• A clogged spray gun can cause the can to burst
• Note the operating instructions for the spray gun
• After use, clean the spray gun using the cleaner intended for this purpose

PROPERTIES

• Outstanding thermal stability
• Good corrosion resistance
• Good penetration
• Odorless
• No aromatic hydrocarbons
• Penetrates and drives out moisture

TECHNICAL DATA