Description
Highly effective additive combination for the effective removal of soiling on the inside of the engine before the oil change. Dissolves oil residues and deposits, envelops dirt particles and transports them out of the oil circuit when the waste oil is drained. The fresh oil can then deliver its full performance in the cleaned engine. This ensures rapid oil penetration, optimal engine performance, minimized wear and reduced exhaust emissions.
AREAS OF APPLICATION
- Suitable for all commercially available motor oils in gasoline and diesel engines with and without a particulate filter (DPF/GPF)
- Tested for turbochargers and catalytic converters
- Can be safely used in vehicles with toothed belt running in oil
- Not suitable for motorbikes with a wet clutch
APPLICATION
- 500 ml is sufficient for up to 5 l of oil
- Add to motor oil at operating temperature before an oil change
- After adding the product, allow the engine to idle for approx
- 10 minutes
- Then change the oil and the filter
- Compatible with all commercially available motor oils
PEAK PERFORMANCE. MAXIMUM PROTECTION
- The Product frees the engine of harmful deposits and residues. Thus, optimum engine performance is provided.
ADDITIONAL INFORMATION
- Deposits and residues cause piston rings to stick
- The compression deteriorates, harmful blow-by gases reach the oil
- Engine damage can result
- Not suitable for use on motorbikes with wet clutches! Fig
- left: Piston ring deposits before flushing the engine
- Fig
- right: After flushing the engine with Liqui Moly Motor-Clean
- Extensive information in unit box
- Application: 500 ml is sufficient for engines with up to 5l oil volume
- Add to oil BEFORE changing oil
- Let engine run at idle speed for approx. 10 minutes, then drain the oil, change the oil filter and put in fresh oil
- Not suitable for use on motorbikes with wet clutches!
PROPERTIES
- Prevents lubrication deficiency
- Reduces pollutant emissions
- Gentle cleaning
- Highly economical
- Does not attack common sealing materials
- Rapid and effective cleaning
- Simple to use
- Tested for turbocharger
- Tested for particulate filters and catalytic converters
TECHNICAL DATA
| Density | 0.808 |
| Net weight (kg) | 0.404 |
| Gross weight (kg) | 0.566 |
| Container contents | 500 ml |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.